Never put CLEAR CARE® PLUS on your lenses and insert directly into the eye. Otherwise, burning and stinging will result. If spillage occurs, clean up immediately with a paper towel. Wash, rinse and dry your hands before handling your lenses or touching your eyes.
1. Remove and place each lens into the appropriately marked L/R domed lens holder, and thoroughly rinse with CLEAR CARE® PLUS for 5 seconds.
- Open the lens holder marked “L”. Remove your left lens and place it on the dome. Close the lens holder taking care to avoid damaging your lens.
- Repeat the procedure with your right lens by placing it on the dome of the lens holder marked “R”.
- Open the snap cap (flip top cap) on the bottle of CLEAR CARE® PLUS and bend it back and out of the way.
- Taking care not to splash yourself, thoroughly rinse the lenses in the lens holders with CLEAR CARE® PLUS for 5 seconds.
2. Fill the CLEAR CARE® PLUS lens cup to the fill line with CLEAR CARE® PLUS and place the lens holder in the lens cup. DO NOT UNDERFILL OR OVERFILL.
3. Tighten the cap (finger tight) on the CLEAR CARE® PLUS lens cup and store lenses for at least 6 hours. DO NOT SHAKE THE LENS CASE.
- Store the CLEAR CARE® PLUS lens case upright.
- If bubbles leak from the hole in the top of the lens case cap, non-neutralized CLEAR CARE® PLUS may be present. Empty the solution from the lens case and thoroughly rinse the lens cup and lens holder with sterile saline or fresh CLEAR CARE® PLUS. Clean up any spillage with a paper towel. Wash your hands thoroughly before handling your lenses or touching your eyes. REPEAT THE DISINFECTION PROCEDURE ABOVE.
- Allow lenses to soak for at least 6 hours to neutralize solution.
4. After washing, rinsing and drying your hands, remove your lenses from lens holder. If desired or recommended by your eye care professional, rinse lenses before insertion with sterile saline. Your lenses are now ready to wear.
Click HERE for the instructional video
